Everflex-Lite™ 3D Printer Plate
Everflex-Lite™ 3D Printer Plate - Image 2
Everflex-Lite™ 3D Printer Plate - Image 3
Everflex-Lite™ 3D Printer Plate - Image 4

Everflex-Lite™ 3D Printer Plate

(5 customer reviews)

$0.00 – $18.22

  • DXF Upload *

    Max file size: 1 MBPermitted file types: DXF

  • Diameter *

    Min: 110Max: 600

  • Width *

    Min: 100Max: 600

  • Depth *

    Min: 100Max: 610

  • I Agree to the Disclaimer *

    By selecting 'Yes', you understand that your billing and shipping address must be identical.

    We do not have the ability to modify, combine shipping on multiple orders, or add to existing orders once placed, so please double check your cart before ordering, otherwise you will need to place a second order.

    Everflex-Lite is the same great material as the original Everflex, minus Zinc plating.

    Additionally, you confirm that you have measured your heatbed's overall dimensions and understand the finger tab(s) are located along the 'Width' dimension, which should correspond to the user-facing side of your 3D printer. Plate corner radii are 5mm and tabs are 10mm in depth; please do not add the tabs in your dimensions! This applies only to plates where the dimensions are configured by you. Pre-configured plates in the dropdown will have different corner radii, finger tabs, and locating features that are specifically tailored to match the respective print bed.

    Cut tolerances are ± 1mm. We will improve this as time goes on. Finger tab(s) do not affect pricing, and circular shape pricing is the same as rectangular due to scrap losses. Everflex-Lite is a raw material and may have cosmetic blemishes, however, these do not impede its abilities whatsoever. You understand that you may only use high purity IPA to clean your plates.

  • Total Price *

  • Total Price *

SKU: Everflex-Lite Category:

Description

Everflex-Lite is the same great material as the original Everflex, minus Zinc plating.

Industry-leading, USA made, spring-tempered flex plate that uses our in-house fiber laser, allowing you to order any size of plate for your 3D printer with fast turnaround times.

For custom plates using your provided DXF files, please select the ‘DXF Upload’ in the ‘Shape’ dropdown. We will reply to your order email for quoting an accurate price.

No timeframe for plates with printing surfaces included. In the mean time, we recommend buying a 5 or 10 mil PEI ‘sticker’ from CSHyde.

Everflex-Lite Highlights

  • Spring-tempered, 1075 material
  • Rockwell HRC 44-47 hardness
  • Flat with no ‘oil canning/wavy’ internal stresses
  • 0.5mm thick with a thickness tolerance of ± 25.4µM
  • Better magnetic permeability and thermal characteristics than stainless steel
  • Documentation/Instructions page here

When a print job completes and cools down to a safe temperature, simply take the plate off and flex either side of it to release the printed part(s) with ease. The finger tab(s) also have a 4.5mm ø hole toward the leading edge that enable you to hang spare plates up to facilitate quick swapping and starting a new print job while a previous one cools down.

Additional information

Weight 0.45 g

5 reviews for Everflex-Lite™ 3D Printer Plate

  1. tmeetze94 (verified owner) –

    Best Spring Steel on the Market. Super flat; Super Low variance. 100% recommended for any printer size (They will cut to whatever you need!!!)
    -OhPvP

  2. palmueti (verified owner) –

    The flex sheet arrived in pristine condition, quickly and extremely well packaged.

    I don’t know who said you can’t get something cheap + fast + good quality, cause subtle design knocked it all out of the park!

  3. galangl (verified owner) –

    This sheet is hands down the best I’ve had so far. Flatter than Energetic and it’s perfectly priced vs WhamBam. A quality product overall. Perfect combo when used with the Staymag.

  4. icantfindanynames (verified owner) –

    If you’re like me, you are probably questioning if this flex plate is worth the money over one of the cheap ones from aliexpress or amazon.

    Perhaps you already bought one of them and are just tired of print issues you suspect may be related.

    I gave up on my cheap-o-depot flex plate and purchased this one, my bed meshes are now flatter across the plate, coupled with some PEI from CSHyde nothing comes off the plate unless I want it to.

    I wholeheartedly suggest you try this plate instead of whatever you’re considering as an alternative, you won’t regret it.

  5. jarrettv (verified owner) –

    I’ve been using these plates for over 6 months on my two Voron0.1 printers and they have been working great. I recently installed a plate on my Voron Trident and same great quality. Also, customer support is top notch. Highly recommended!

Only logged in customers who have purchased this product may leave a review.